FAQ

Spin PRO

What size rollers does the Spin PRO work with?
The Spin PRO will clean roller naps from 3” all the way up to the 18″ roller naps
How do I remove the roller nap from the Spin PRO when I’m finished cleaning it?
Put your drill gun in reverse while holding and pulling away your roller nap.
Can I use an Impact Drill?
No, the Spin PRO is made for standard drill guns. For Best Results, Place Your Drill Gun on High Speed!!!

Spin PRO Mini

What size rollers does the Spin PRO Mini work with?
The Spin PRO Mini will clean ¼” and ¾” mini roller naps. The ¼” roller naps are placed on the tip of the Spin PRO Mini. The ¾” roller naps are placed onto the Spin PRO Mini without the ¼” tip interfering with placement.
How do I remove the roller nap from the Spin PRO Mini when I’m finished cleaning it?
Put your drill gun in reverse while holding and pulling away your roller nap.
Can I use an Impact Drill?
No, the Spin PRO Mini is made for standard drill guns. For Best Results, Place Your Drill Gun on High Speed!

Monkey KLAMP

What type of ladders does the Monkey KLAMP work with?
The Monkey KLAMP works with ALL MAJOR LADDER BRANDS that manufacture Fiberglass/Aluminum A-Frame Step Ladders.
Which side of the ladder does the Monkey KLAMP work on?
The Monkey KLAMP can be attached to either side of the A-Frame Step Ladder. For more information on how to correctly install the Monkey KLAMP on the LEFT or RIGHT side, Check out our installation videos on MonkeyRung.com

PRO TIP: For Switching the KLAMP from left side to the right side of the ladder: You will have to Remove Thumb Screw and place it on the bottom of the small bar where the attachment inserts. The thumb screw (screws) right into the bottom of the notch on the attachment. This will keep the attachment from coming out.

Do I need to remove the Monkey KLAMP from the ladder after each use?
No, after you are done with your ladder task, simply Remove your attachment from the Monkey KLAMP. The Monkey KLAMP is stationary on the side of your A-Frame Step ladder. Fold ladder and store where needed.

Monkey GRIP

What type of ladders does the Monkey GRIP work with?
The MONKEY GRIP works with ALL MAJOR LADDER BRANDS that manufacture Fiberglass/Aluminum D-Rung Extension Ladders.
Which side of the ladder does the Monkey GRIP work on?
The Monkey GRIP can be attached to either side of the Extension Ladder. For more information on how to correctly install the Monkey KLAMP on the LEFT or RIGHT side, Check out our installation videos on MonkeyRung.com
Do I need to remove the Monkey GRIP from the ladder after each use?
No, after you are done with your ladder task, simply Remove your attachment from the Monkey GRIP. The Monkey GRIP is stationary on the inside of your Extension ladder now you can store where needed.
Where does the Hitch Pin Clip go?
The Hitch Pin Clip will be placed into the closest hole to the rung of the ladder. This will secure the Monkey GRIP in place.

PRO TIP: When removing attachment, always give the thumbscrew a couple of turns towards locking as this will keep you from losing your Thumb screw.